Skip restarting during SQL Server installation

When installing SQL Server 2008 one can run into “‘Reboot required check failed” situation.

After seeing it few times already, I think a solution is worth mentioning.

“Why don’t you just reboot?”, you say… Well, most likely it would not help you, but try it first.
If this would not help, then try the following:

Start regedit.exe
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
Locate PendingFileRenameOperations
Remove any data associated with the value (you may want to export the value for later review)
Reboot and rerun installation, check should pass.

Update. As a respond to some comments about solution above not always work you may consider the following:

Make sure that after you reboot entry in the registry does not reappear.
If it does, remove it again, but do not reboot, just go ahead with installation process and click “ReRun”. Most likely you would be fine now.
You may also try and see that other ControlSet001, ControlSet002, etc do not suffer from the same problem (solution mentioned by Mike Hills below).
There was mentioning that some installations of Visual Studio 2008 could cause check to fail as well. So if nothing from above helped, uninstall Visual Studio (comes with light version of SQL Server), install SQL Server and then reinstall Visual Studio again.

Comments

There are currently no logon servers available to service the logon request

When bringing a new server on line, you may see an error that says: The Security System detected an authenticaton error for the server ldap/xxxxxxxt. The failure code from the authentication protocal Kerberos was "There are currently no logon servers available to service the logon request. Event id: 40960 category: SPENGO (Negotiator) (0xc000005e) This issue is the result of missing or the inability to contact the DNS SRV (SeRVice) records. You just brought a new server on line. To complete the process, the server has to register its own host A record and SVR record in DNS. To do this, Type the following at the command prompt: IPconfig /flushdns IPconfig /registerdns net stop netlogon net start netlogon flushing DNS will remove all old or improper DNS records registering dns records registers your Host A record restarting the netlogon will register your SRV records. __________________________________________________________________________________ Speaking of ...

test vpn bandwidth and speed with iperf

This article explains how to use a free utility called iPerf to test the speed of a VPN connection. In this example I am running iPerf on windows but there are other versions available (i.e. Linux). Download iPerf from http://linhost.info/2010/02/iperf-on-windows/ Put a copy on 2 computers with 1 either side of the VPN. In this example I have put in the c:\triangle folder On the “server” PC open a cmd prompt and navigate to the folder containing iperf. Note on computers running Win7 or Win2008 I recommend running the cmd prompt in elevated mode. Run the command iperf –s On the “client” PC open a cmd prompt and again navigate to the folder containing iperf. Run the command iperf –c After a short while the estimated bandwidth is displayed.

How fix Virtual Memory Too low in Windows XP,Vista,Windows 7,Windows Server 2003

Some times i got the icon on below right side of my system in Windows XP,Vista,Windows 7,Windows Server 2000,2003.How can Fix this solution.Here the solution. This solution work for all types of Windows i.e windows 95 to Windows 7. Virtual Memory is the space your computer uses when it's short of RAM(Random Access Memory),which is the memory used when running programs like Microsoft word,Power Point and other application in our system . Solution 1: Try to increase Your RAM size. Solution 2: Change the Paging Size of drive as shown below steps 1.Go to MyComputer--> Right Click--> Click Properties. 2.Click Advanced tab from System Properties tab. 3.Click Sett...

Windows Tips

Search This Blog